Replace devices in your home that can interfere with network traffic on the 2.4GHz frequency range. These devices include many cordless phones, microwave ovens, and the like.
Check your signal strength with these devices on and off to determine if they are the cause of your signal problems.
Buy a wireless network analyzer to track down the source of interference.
Change your signal channel
Routers can broadcast on a series of channels, between one and eleven. Change to a channel that will allow your router a clear signal between other wireless networks.
Use a software utility to analyze which networks are using which channel.
Configure your system for an unused channel.
Reposition your Router.
Raise the router up as far as possible to increase the effective broadcast range.
Move the router away from any metal including metal shelving, filing cabinets and similar common objects.
Move the router closer to the receivers, if possible.
Raise your transmit power.
Check your router’s documentation and configuration utility for the ability to change the Xmit power of your router: the amount of power it uses to transmit the signal. generally you can boost this number by up to 50mW, however you do risk overheating or damaging your router.
Replace the Antenna.
Unscrew and replace the broadcast antenna on your router with a model that delivers more power. Not all routers allow for new antenna to be attached, but many do.
Install a Repeater.
Purchase a repeater. A repeater is a piece of hardware that acts like a wireless network expander. The repeater takes the signal from your router and boosts it to increase the range.
Wireless repeaters are increasingly common and affordable and will probably be available in your local computer store, or on the Internet.
Install a Wireless Amplifier
Purchase and attach a wireless amplifier, also known as a booster, directly to your router. A booster can be more affordable than a repeater as they only increase the strength of your existing signal, rather than the strength and range.
This entry was posted on Monday, May 12th, 2008 at 1:49 am and is filed under Wireless. You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.